Danfoss Retrofit DIY Kit

Part No. 011-1010

Compressor BD2.0F, BD2.5F, or BD3.0F to BD50F

Complete Additional Parts List

Item No. Part No.

Qty

Description

1 --- tbd Acetone or Similar Cleaning Solvent
2 --- 1 Any Air-Cooled 12 volt or 24 volt DC Condensing Unit
Using a Danfoss BD2.0F, BD2.5F, or BD3.0F Compressor
3 --- 1 Cotton Rag
4 055-0040 tbd Foam Tube or Adhesive Tape Insulation
(to Insulate Suction Line)
5 --- 3 - 5 oz Refrigerant - R134a
(and Refrigerant Cap Tap Adapter if Using Disposable Cans)

This list includes all of the additional parts required to rebuild your refrigeration system.  The parts that have a part number are available through Rparts. 

 

Complete Required Tools List

Item No. Part No.

Description

1 --- #11 X-acto™ Blade and Handle
2 --- Assorted Open End and Adjustable Open End Wrenches
3 079-0880 Bubble Solution Liquid Leak Detector
4 --- Hammer
5 --- Medium Phillips Screwdriver
6 --- Nitrogen or CO2 Tank with Regulator
7 --- Pencil and Marking Pen
8 --- Pliers
9 --- Propane Torch
10 079-0075 Refrigeration Service Manifold Gauge Set
11 --- Slotted (flat bladed) screwdriver
12 --- Tape Measure
13 079-0650 Tubing Cutter
14 079-0250 Vacuum Pump
15 --- Wire Cutting, Stripping, and Crimping Pliers

This list includes all of the tools required to rebuild your refrigeration system.  The tools that have a part number are available through Rparts. 

DIY Systems Kit Page