System 1M DIY Kit

Part No. 011-0400

Air Cooled Condensing Unit with Roll Bond Evaporator

Complete Parts List  (Included with Kit)

 

Item No. Part No. Qty

Description

1 010-1120 1 Mounting Kit for Danfoss Compressor
2 010-1170 1 Danfoss BD50F Compressor (mm)
3 010-1175 1 12/24v Power Module for BD50F (3-pin)
4 012-1001 1 Air-Cooled Condenser 7" x 9" - 2 row
5 015-0280 1 SS Mounting Bracket for Danfoss Mechanical Thermostat
6 015-0282 1 Danfoss Refrigerator Thermostat - Service Pack (1)
7 019-0150 1 Small Evaporator Box 12 1/2" x 11 1/2" x 5 1/4"
8 020-0500 1 Spun Copper Filter-Dryer
9 025-0031 1' Copper Tubing - 3/16" OD
10 025-0032 16' Copper Tubing - 1/4" OD
11 025-0201 3 Copper Union - 1/4"
12 025-0205 1 Copper Union - 3/16"
13 025-0301 1 Fitting Reducer Copper Union - 3/8" x 1/4"
14 025-0701 1 Copper Standard Tee - 1/4"
15 027-0001 4 Heavy Duty Flare Nut - 1/4"
16 055-0036 3' 3/8" x 3/8" Thick Tube Insulation
17 055-0104 1 SS Mounting Plate
18 055-0181 1 SS Fan Shroud (fits PN 012-1001)
19 071-0125 1 Condenser Fan 4.68" Sq.x 1" - 12 vdc
20 079-0661 1 Swaging Tool - 1/4"
21 079-0803 1 Stay-Brite #8 Solder - 2' Length
22 079-0806 1 Stay Clean Flux Paste - 4 oz Jar
23 079-2001 1 SS Tube/Fitting Brush - 1/4" OD Tube/Fitting Size
24 079-2010 1 Abrasive Cleaning Pad - 6" L x 4" W
25 096-0034 2 Schrader Valve - 1/4" OD Stem
26 096-0040 2 Base Valve - 1/4" Male Flare
27 096-0111 1 Capillary Tube Strainer - 1/4"
28 240-0001 12' Safety Duplex Tinned Cable 18/2
29 290-0001 6 Fully Insulated Female Disconnect 22-18 ga.
30 290-0011 2 Fully Insulated Female Disconnect 12-10 ga.
31 400-0010 2 Hex Head Mounting Bolt – 18-8 SS, 5/16-24 x 1/2”
32 400-0011 2  Flat Washer - 18-8 SS, 5/16"
33 400-0012 2 Lock Washer - 18-8 SS, 5/16"
34 400-0111 9 Nylock Nut - 18-8 SS, 6-32
35 400-0300 5 Phillips Pan Head Machine Screw – 18-8 SS, 6-32 x 1/2"
36 400-0305 4 Phillips Pan Head Machine Screw – 18-8 SS, 6-32 x 1 3/8"”
37 400-0900 1 Saddle Mount - #8
38 400-0911 10 7.5" Standard Cable Tie
39 NA 1 CD Manual

This list includes all of the components required to build your refrigeration system.  With basic soldering skills, your refrigeration unit can be ready to install in a few hours.

 

DIY Systems Kit Page