Climate Control (York)

 

Climate Control (York)
Engine-Drive Compressor

The Climate Control compressor (better known as "York", its previous manufacturer), is very similar in appearance to the Blissfield HGB 1000.  The most noticeable difference is the weight with the Climate Control weighing only a little over 1/2 as much as the Blissfield.  This is due to the use of a cast aluminum block with iron cylinder inserts (the Blissfield is entirely cast iron).  Other differences include the higher speed range of the Climate Control (6k rpms vs 3k for Blissfield) and availability of two different displacements.  These can be important factors when selecting a compressor for use in a marine refrigeration system as both over-capacity and over-speed are common problems with many of these system designs.

Oil
Climate Control compressors are delivered with a full charge of POE (polyol ester) oil which is suitable for use with all refrigerants.  No flushing is required for R-12 (mineral oil) retrofit installations.

 Valves
Climate Control compressor do not include valves - Valves MUST be purchased separately.  RParts offers a complete selection of compatible screw-on rotolock type service valves. 

Basic Specifications:

bullet Refrigerants*:  R-12, 134a, 22, 502, 404a
bullet Speed Range:  500 - 6,000 rpm
bullet Number of Cylinders:  2
bullet Displacement:  6.1 and 10.35 cu. in.
bullet Oil Charge:  14 oz (Mineral or POE)
bullet Capacity:  see table
bullet Inlet/Suction Valves:  Not Included
bullet Height:  9.4" (239 mm)
bullet Weight:  14 lbs (6.4 kg.)

* Note:  Not all refrigerants are suitable for all applications.

On-Line Manual
For additional technical and dimensional specifications and service information, click on the section numbers of the complete on-line Climate Control Service Manual (pdf format).  This manual is quite large and broken down into four parts for easier download.  Download file sizes are listed below. 

Section #1 - Specifications & Inspection (1.5 Mb)
Section #2 - Service (1.1 Mb)
Section #3 - Troubleshooting and Model Identification (0.5 Mb)
Section #4 - Valves and Parts (1.3 Mb)

 

Rotolock Valve: 5/8" Flare - 1/4" Flare Access Port
Model: COMPRESSORS:010-0503
Qty: 0

$59.95

Rotolock Valve: 1/2" Flare - 1/4" Flare Access Port
Model: COMPRESSORS:010-0504
Qty: 0

$59.95

CCI (York) Compressor - 6.1 cu. in. Model 206
Model: COMPRESSORS:010-0600
Qty: 0

$1,050.00

Oil Wick - Both Models
Model: COMPRESSORS:010-0601
Qty: 12

$2.95

Complete Gasket Set - Both Models
Model: COMPRESSORS:010-0602
Qty: 1

$27.50

Crankshaft Seal Kit - Both Models
Model: COMPRESSORS:010-0603
Qty: 0

$44.95

Displaying 7 to 12 (of 15 products)
  • 1
  • (current)2
  • 3