Sys 1M Tradesman Kit w/0200C Roll Bond Box w/o Base Valves

System 1M Tradesman Air-Cooled Kit with 019-0200C Roll Bond Evaporator Box

This kit is intended for someone who is skilled in the trade.  The kit contains the unusual parts to build the system in our manual but many items are not included such as tools, solder, flux, tubing and the base valves. No technical support is provided and no returns are accepted.  There is no warranty on this kit. 

System 1M Tradesman kit is designed for converting an icebox to a refrigerator/freezer box.  This system is suitable for milder climates where the air is sufficient to remove heat from the refrigerant.

The system includes the industry standard Danfoss BD50F, 12/24V compressor and a freezer roll bond evaporator box.  

With adequate insulation (3" minimum), this system configuration includes a larger box (019-0200) and will give you up to a .70 cu ft freezer and up to 12 cu ft refrigerator. 

We have assembled the kit using parts available through RParts.  See the 1M parts list shows parts not included with this kit.  The 1M Tradesman parts list will be available soon.